Jul 22, 2016

RDW National Service for Road Trafic :-)

The RDW, our National Service for the Road Trafic saw the Bleu Lord wedneysday. In the burning heat, temperatures rose to 36 degrees Celcius, the bleu one was inspected. Well at least, in the morning of this day when it became 36 degrees, I was there around 9 o'clock in the morning.


Ready for the road.

Pip was anxious to accompanie us.

 Turning the 33 to the Highway, on my way tot the inspection.
You should've heard the boxer growl.


The inspection did not go as aspected; I hadn't mentioned that I swapped the old 1350 ccm engine for the more powerful 1712 ccm from my old Tulipwoodracer, the QV.
This delayed the proces, but eventually did not frustrate it. The public servant asked me to declare where the 1712 engine came from. So I did. And I only had to fill in one form. The servant had to read the exact engine number on the block. I thought I'd be clever and make a little note beside the battery, good visible in the engine compartment. The servent however had to read the exact number where it was engraved in the cast iron block. That lasted a while because my note wasn't correct, I forgot to copy the code properly, so I myself had to sand the block and read the AR code instead of a A code to the public servant in duty.
After that the inspector checked the underbody and weighted the car: 1068 kgs in full armour.
After the inspection the bill was around 160 euros, just to register the car.


In the inspaection hall a rather fine C6 V6 HDI rolled up from behind.

The 33 with the unknown engine...

Some foreign bugs flew inside the hall

Underbody: check

Even Marianne was pleased to see any progress, at last (left side)

The second part was to establish the amount of taxes (BPM) I wouold have to pay. Therefor I had to declare what amount the carbon dioxide was  the car produces. This was the funny (!) part. Several forms and notices I checked to establish the amount. More than one hour I spent reading and calling to the Tax services call center. I had to calculate the amount for the declaration, knowing that my car was older than 25 years, and the taxes would be put on € 0. In the mentioned heat I was calculating like a cockchafer to find out the (BPM) taxes. (Dutch citizens have te calculate their taxes, and when they're lucky the calculations will be checked immediately by the tax office servants.)
In despair I read my declaration form to see what I had to do when the amount was calculated, when I read in the last line of the form, in small capital: cars over 25 years need not to make a tax calculation, taxes will be zero....
Have a nice day.

At least the 33 had some fine company on the parking lot.



Jan 7, 2016

The calculated way of driving

The little Fiat has had some attention last week. During the christmas holidays I changed the sparkplugs, oil and filters (less then € 50). The stupid gasket of the engine head still leaked oil like a drunken sailor. It seems to be a common problem of these engines. So I took a tube of silicon kit and puttied it till it never leakes again.
The tires are worn too. I had these tires since we bought the little one, almost two years ago, and they weren't very good. The profile was good but the front right tire had a puncture and was empty every three months.  And while winter is coming to us from the north (Groningen and Friesland are frozen in by blizzards), I bought a full set of second hand winter tires at Gijs Janssen's shop. Good service reasonable prices and a nice guy too.
For 50 euros I became a set and that's cheap. 14 inch wheels, so now my last years copricerchi, imitation FIAT wheel caps, don't fit anymore. Maybe I will look for some light metal wheels to put the tires on, maybe I won't.
This car still surprises me. Its a little rascal and for the purpose we need a car, just good. In our holidays we went to Maastricht several times, we visited Aachen and Nijmegen. Comfort isn't Alfa like, material in the car isn't too, but we're driving. When I make a short calculation this is what I find:

Costs up till now (from february 2014) 25.000 kms:
Maintenance
clutch and timing belt € 710
2x oil and air filter, sparkplugs € 52
oil due to gasket leak € 50
windscreen wipers € 20
APK (technical inspection) € 30
sub sum € 862

Extra costs
gasket engine head € 18
gasket injection unit € 16
used winter tires € 50
sub sum: € 84

Tuning & trims
gear lever knob € 20
gear lever cover € 16 and a lot of love
wheel caps € 38
sub sum € 54

Exactly 1000 euros for almost two years of driving, ex petrol, taxes and insurance.
Count that up with petrol (1,50 a liter =) 2500, taxes 616, insurance 408 euros the total amount of 25.000 kms or two years driving is 4525 euros. Per kilometre this is 0,181 cents total cost for everything. Oh wait, the car itself cost the proud sum of 650 euros.

So the total driving costs are
€  1000 maintenance and extra costs
€  2500 petrol
€   616 taxes
€   408 insurance
€   650 car Fiat Punto 60S, 1994
€ 5175 all costs / 25.000 kms is 0,207 cents for everything.



I figure some more costs are due this year. The front brake discs are gone. I have to change them, plus an extra set of brake pads and brake fluid. Don't know what more I'll find.
I looked the discs up, and a rediculous sum of 28 euros are the price of a set of two discs for the Fiat. Pads are not even 20 euros. So this repair won't alter my total driving costs very much.
In that respect the Fiat is a sensible car. It's practical, cheap in maintenance and driving (I calculated 1litre for 15 kms). I stiil like the looks of the little rascal for a small car. It's a good design. What I don't like is the interior, which is cheap and of a mediocre quality. But what would we do with an all new car and being cautious not to scratch or dent it?
This is another way of driving, very sensible. When the Alfa will be on the road, in spring time when the weather is fine,  we'll experience a whole different way of driving.

I'll keep you posted.

Jan 3, 2016

Meanwhile in my garage, therapy

To all my readers, have a healthy and good new year and stay on the road safely.

Since my health is getting better, I'm able to take a spanner and loosen a tight nut, my ambition to work in my garage grows. To start easy I took my old Raleigh racebike out of my cellar and dismantled it to find out how the state of the bike is.


When I was young, back in the seventies and eighties, the dutch racing team of Peter Post, Team Raleigh was succesful on the international tracks. I remember Joop Zoetemelk, Peter Post, Jan Raas, Hennie Kuiper, Gerrie Kneteman, Johan van der Velde, Steven Rooks, Gert-Jan Theunisse and Peter Winnen (later in Team Koga). Names engraved in my memory as the names of my parents. I remember watching the early days of Tour de France reporting on black and white TV. When my parents were able to buy a colour TV we saw the typical red, black and yellow team colours of the shirts and bikes. Their shining bikes in the French sun. and their successes kept on coming. This was the golden age of dutch cycling, at least for me.
I was around 15 years back then. By taking the papers out in my neighbourhood,  I earned about 800 guilders (would've been 800 euros by now) for a race bike. I bought it at Chrit Jaspers'. This was a renowned shop in our region for bikes and stuff. I remember how he sold me a Raleigh team jersey, partly in wool, and a short which was way too big for my tiny legs. The shop stil exists, ran by Chrit's eldest, Jannie, manne.

I always kept my Raleigh because I have so many good memories with it. I regularly went to the south of Limburg to climb the hills. Once I went for Luxemburg for a short vacation, on my bike. When I went for my studies to Nijmegen, I took my bike with me and rode several kilometres around the city to Arnhem, Millingen aan de Rijn, Kleve, even Wageningen and to and from home occasionally (Nijmegen - Herkenbosch: 100 km).

This is how my bike was stored in my famous cellar.
 Pip found it and brought it to my attention as a project again.
Now the Raleigh is dismantled, all parts are repaired, cleaned and ready for fitting on the frame. I've got a nice pair of wheels from my neighbour, who had a Gazelle in an impossible frame size. But all parts of this similar, time exact bike fit on my Raleigh. Here are some pictures of the work in progress, since the initial post was from a month ago. This is gonna look like an easy job, but I didn't photograph all steps. and for a therapy project, I had my hands full with this.

Double butted tubes! That was the hit in 1981 from Reynolds, the 531 tube. There was only one better tube, the 835 (?) tube.

My bike was the Rapide, a middle section and middel priced recreational bike in team colors.


Some dents and scratches give the old frame character. 
This is where the shifters handle sits on the angled tubed.

The fork of this one was not completely chromed, 
but the Suntour pads seemed to be special back in the eighties.

My box of spares and parts, after dismantling the neigbours Gazelle.
In the Land of Plenty it is easy choosing.

Before ...

... and after cleaning the Weinmann brakes.

The set up of the Gazelle Wheels is sufficient and even wel kept.

The Rigida rims are dull and slightly corroded. 
The spokes are chromed and are very well kept.


The crancks axle overhauled.

Here the frame is already painted. The cranck axle is due for mounting. 
I could not get is exactly adjusted. So some refining still remains.

Weinmann brake handles before...

... and after a good polish with Commandant 4 (see earlier posts on the Sportwagon)

The Japanese crancks fitted on the Gazelle are very nice time exact pieces: Super Mighty!

 This is the original Sakae handle bar. I sanded and polished it untill it shone. See below.

A rewarded price winning brand, it seems Sakae Custom

Road Champion!

The complete steering set up is polished.

The frame of the bike had become scratched and dirty over the years (I bought it in '81). Cleaning, light polishing and cleaning again gave a 'rat look' frame which I painted with clear varnish. 

The original parts were dismantled, cleaned and assemled again. This is a Suntour VX rear shifter or derailleur. This one sat on my neighbour's bike, since mine was slightly bended by a crash in 1984.

I never liked the original cranck, my neighbor had the right type I wanted. but again the chain wheels of my Raleigh were nicer. Luckely they were worn, so I had no chice mounting these ones. The size is bigger, mine had asetup of 52, 46. These are 54, 48. Alas the crancks don't fit realy good on the axle. So I have to look foor an other cranckset. vintage sets are expensive as hell, so I have to go to Jannie Jaspers, manne. Maybe he has some old stuff in his cellar?

The Weinmann brakes are simple though very efficient. 
I descended the Col des Aravis with this set. 
I'll look up the photo I took up there for a next post.

I love these brake handles. By polishing they look even better, but I don't bother them being scratched. That looks rather cool. The mounting of this type is with a srew on a fixed spot on the handle bar. 






Nov 6, 2015

New love?

Since our little Alfa is almost on the road, and my time is sheer unlimited, I'm looking for a new project. Of course one would think of an Alfa Romeo, but what type could it be; being cheap to buy, in an acceptable state, with spare parts still available, and new parts in an acceptable price range. Not too complicated technics also.
My favorite Alfa is the Alfetta GTV, but the costs of an acceptable specimen to recover are too much. The second best favorite is the Giulia Berlina, and they are even more pricy. A normal Giulia is an alternative, but as costly as the others. And too old to find a good relative rust free specimen.

My wife wants a VW ... not a diesel, but a Karmann Ghia. These cars are too expensive for my budget, costing around 8 tot 10 thousand euro's. And than the project even has tot start. My early opinion about a VW as a dumb simple box is turning into a sympathetic glance for a brand with ample spare and new parts and interesting models to restore. The scene of Golf mk1, Karman Ghia or even Porsche 356 is intriging and inspiring. Sometimes I find myself drewling at a 1600 Variant, can you believe this?


But I can't sell a VW restoration to my blog followers; no, this wil ruin my reputation. Since my view on German cars is too specific (follow this blog to find out), I wouldn't dare it.

French cars like Citroën are favorite too, I like the GS, which seems to be affordable, or a CX. But the CX is too complicated and Citroën has a built quality even worse than Alfa Romeo (I know because I had four 2CV's in my earlier days).

No, my face turned to the north, Scandinavia, more exact Sweden. My eyes fell on the SAAB 96 for it's sturdy looks, character and sound quality. And guess what, the wife likes it!

Click here for more info.
So my days are filled with SAAB stories, ad's and video's to learn more about this little rascal from Sweden. I once had a neighbour who I very much liked because of his adventurous character. Hij once had a 96 and restored it just in front of my adolescent eyes. He was the first to learn me about working on a car, sorry, on my first 2CV. His 96 was a little worn out and he decided to restore it. That was a process that made a deep impression on me. Not only the dismantling of the car, but the working on such a project; he dismantled the whole thing in his very garage. Later this man bought a Giulia Sprint and also resored it, because this was the car he always wanted.  I know he restored a Land Rover 111 ambulance and swapped it into a camper to travel the world. What a great guy!

No, this SAAB will be a lasting model for inspiration. It needn't to be very old, as long as the state is reparable. This video made my decision clear: 


The newer four cilinder Ford V4 has my preference, since this exemplifies my love for boxers and odd engines (my 4 2CV's had a 2 cilinder boxer, the 33's have 4 clinder boxers and this SAAB has a V4 motor).
Prices are interesting and the state their in is relatively good.

To be continued.



Oct 21, 2015

New start

Yes, the reconstruction of a human engine is somewhat different from that of a car. Changing or altering parts is relatively easy, the adaption of the whole machinery to the new parts is more difficult. And then there is the recovery of the mechanic intervention at all. Now it's been 9 weeks and my machine is working fine, somewhat low in power sometimes, but that'll come back in time.

I even managed to work on my Bleu Lord. A little spot on the tailgate caused waterintrusion in the boot (the car was outside and I wasn't able to put it in). So I had to detect the whole in the body and repair it.
It seemed to be an old repair badly fixed. Apparently there was some corrosion in this corner and it was welded kind of clumsy. It is a tricky corner, yes, but the repair wasn't quite good. For now I had to fill the whole and since I'm not a welder, I used polyester putty. In this special corner it wouldn't be visible, when the tailgate was closed. My main concern was now to prevent water to come inside.

This was a light exercise in bodywork and a good revalidation exercise for me too. It was a pleasant alternation of my 007 James Bond replays or my Tumblr posting.

A good portion of polyester putty on the difficult corner and sanding till the metal comes through. 
New putty and sanding again till the surface is somehow smooth.


After sanding I sprayed the corner black base color

And a good layer of bleu over and over.

After drying I sanded the edges and used the commandant 4 polish again, 
to let the corner emerge in its natural environment

Result

Result

 Looks nice, doesn't it?

The new part is brighter than the old part on the tailgate. 
Commandant 4 has to be put to work again to bring the parts together. 
It'll be a good exercise for my muscles on my chest.
Another exercise was the polishing of the windowedges, which were worn out by the sun.

I used the cheapest "wonder"blocks of the Aldi to polish the plastic (partly rubber) framework.

Wonderful stuff, with some water polishing the rubber parts it works wonderful. 
But it's not the toughest sponge, it's gone in a swirl.